Search results

So I have some stuff lying around and I am trying to free up some space. So I decided instead of finding a clone to brew like I usually do, I would try my hand at a first ever recipe. I wanted to not have to go buy anything and pretty much use what I had on hand but I am open to changes to make...

Now that I have my brew panel built, I started looking at things and thought that the cords coming from my kettles seemed unwieldy at cleaning time. Sure I could undo the clamp at the TC fitting and remove the element, but that can be a pain. I love Brewhardware stuff. Their integrated TC...

I bought a 3 wire RTD off ebay that has the quick disconnect at the probe. I needed a longer cable so I took the quick connector apart that connects to the probe and inside the connector, both blue wires are soldered to 1 pin. Is this correct? That means there are only 2 connections at the...

Finished up my electric brew controller. I plan on running 2 heating elements (never on at the same time). 1 in the HLT that is controlled with the temp probe + PID and 1 in the Boil Kettle that is controlled with the PID manually. Each element is on an outlet plug. Each 24V Pump is also on a...

Just about done building my electric brew panel. Is it necessary to seal each component that goes through a wall or door with silicone? Curious if everyone did or not.

I have 2 used: 3 piece Stainless Swagelok SS-63TS12 SS ball valves. They have 3/4" compression style fittings on both ends. They have been boiled recently to ensure they are clean. I have the nuts and both ferrules for all the ends. 1 set is shown, but each valve will come with 2 sets. I'd like...

Upgrading my rig with cam locks. Was going to go with aluminum but the shipping was 3x that of the stainless ones so went with stainless. https://www.proflow-dynamics.com/ Contacted them and got their coupon code "Maple 15%" working again.

Dual Temp Controller box. Comes with Green (cool) and Red (heat) indicator lights to show which outlet is on. Removable power cord and removable temp probe connections. Measures: 7 x 5 x 3.25 Built some of these for people who just would rather not bother. Protective cover still on the...

I made 3 of these. $45 each plus shipping OBO. These will fit a max diameter of 26". You can cut down the threaded rod to whatever size you need. Or I could cut them down for you. These are made from garbage disposal flanges, stainless threaded rods, stainless nuts and washers. They come with a...

Trying to get some of Alpine Beer Co. Nelson. I am in VT and can get Heady Topper, Lawson's Sip of Sunshine and Fiddlehead's Second Fiddle. Can't get Hills.

I have a nice STC-1000 fermentation chamber controller box. It has a removable temp probe, a removable power cord and a fuse. Also has nice lights to tell you which cycle it is on, heat or cool. Each heat and cool has 2 outlets so you can plug in a fan or whatever else you might like. Also has a...

Ok, I am trying to figure out my water profile and see if I have good chemistry. I am an extract brewer, I don't need mash pH and things like that. Should I even worry about my water as much since I am doing extract with grains type brewing? I have looked over several calculators and they don't...

Delete

So my dad wants to bottle more beer since the Keezer is at my house and he doesn't get as much beer from each batch because of that. :rockin: So we have been brewing 2.5 gallon batches as of late to bottle instead of kegging. I am working on improving my bottling from a keg. Got a counter...

Was wondering if you can just copy the instructions from a NB kit and buy all the stuff from your local brew supply store. I figure it was as simple as that but wanted to make sure. Saves on shipping costs as long as my local has all the stuff required.

Just started home brewing and been lurking and reading a lot on these forums. Got my keezer all set up and have 7 extract brews under my belt. Just made a Zombie dust clone and a Two Hearted clone. But I have never tasted either. I would like to trade for some of each. Would love to try Pliny...