Search results

Finally decided to part out my complete fully electric HERMS brew setup. 15 gallon kettles for 10 gallon batches. Feel free to make offers. Local pick up in the Twin Cities, MN. Willing to work with buyers on shipping if necessary. Control panel with 3 tri-clamp temp probes, two 5500w...

I am selling a complete E-HERMS home brewery setup, it uses all tri-clamp connections. Electric Brewing Supply fully electric 30A PID control panel with 2 5500LWD heating elements and 3 temperature probes. 3 15 gallon kettles with fully custom welded tri-clamp fittings. HLT has a 50' stainless...

I am selling my 2-element 30A panel from electric brew supply. It's fully assembled and includes two 5500W stainless ULWD tri-clamp elements and 3 tri-clamp temp probes. Also comes with all cables including 2 pump cables. It has been used less than 10 times and works great. I'll also include...

I am selling a complete E-HERMS home brewery setup, all tri-clamp connections. Sink, table and Exhaust Fan/Hood not included. Electric Brewing Supply fully electric 30A PID control panel with 2 5500LWD heating elements and 3 temperature probes. 3 15 gallon kettles with fully custom welded...

I've looked all over and can't find an answer one way or the other. I have a 3 vessel electric HERMS setup using all tri-clamps. Do you guys leave your setups fully assembled when not in use or do you tear it all down and only set it up for brew day?

I purchased a DIY 30a PID panel from ebrewsupply and was wondering if anyone has had any luck finding a good folding mount for a wall application. More specifically I was trying to find a TV or computer monitor mount that fits up snugly on the wall and pulls or folds straight down or out and...

I have disassembled my old keggle system and am selling off the parts as I prepare to finish my new system. Will ship to lower 48 only, sorry. Here’s what is available: 5 SS Ball Valves with weld-less bulkheads and quick disconnects (female Q/D’s not pictured but included). $35/ea shipped...

I am looking to buy a used exhaust hood with a fan included that was used industrially. The fan in it is a 115v fan, but it is wired through a box to be used on a 277v single phase industrial circuit. Would I be able to eliminate the converter box and wire the fan directly into a 110/120v...

Selling off my gas/electric hybrid homebrew system. This is a cut keggle mash tun. The MLT has a jaybird false bottom, stainless steel ball valves with disconnects and a stainless steel dip tube. There is also a stainless steel thermoport for an RTD style temp sensor. This can either be plugged...

Selling off my electric/gas hybrid homebrew system. This is a cut keggle HLT with a 50' stainless steel HERMS coil, stainless steel ball valves with quick disconnects and 2 stainless steel 1500w 120v heating elements. Comes with a stainless dip tube and sight glass too. I will throw in two hoses...

Selling off my gas/electric hybrid homebrew system. The boil kettle is a cut keggle with stainless steel ball valve and quick disconnect. Also has stainless steel dip tube inside and a sight glass. The sight glass was cracked but after some DIY repairs it still holds water, though it may need to...

Selling my all grain brewing system (feel free to shoot me an offer). It's a keggle hybrid system, E-herms mash with propane boil. Plugs right into your wall outlet in the garage, no special 240v circuit required! It consists of a PID controlled 120v element to maintain mash temp. I did add a...

cancelled

I'm looking for a Brumatic type 120v controller. All I need to control is a single heating element and single pump, prefer to have both PID and manual modes but willing to do only one or the other if the price is right. Just respond here or PM me if you have one (pics if possible). Would need...

I am wiring up a control panel with the wiring diagram below and have a question about the wiring for the RTD sensor on the PID. In the diagram it has red wires to pins 3 and 4, a white wire to pin 5 and another white wire jumping from pin 5 back to pin 3 but in the manual for the PID on the...

As the title states I'm looking for a 15" keggle false bottom with a hinge and a center hole that will fit 1/2" steel dip tube (think thats a 9/16" hole.) Please reply or PM with price and location. Would need shipping to 55420. Willing to pick up if you live in the Minneapolis/St. Paul metro...

Found this site linked on my local craigslist and had to share it with you all. I use pin-locks, which are currently selling here for $35 each and they throw in a new set of seals just in case (althought they are already pressure tested). I ordered one and it was in even better shape than...

I have a new, never used or filled, certified 2.5lb CO2 tank. I got it with a kegorator kit I received as a gift. I have a 5lb tank so I do not need this one. It's a brand new shiny aluminum tank! Will be shipping from 55109 on UPS ground or SPEEDEE Delivery service if you live in their...

I am building an eherms mash setup (will still be boiling with propane) and am on a budget. I'd like to use this element to hold the water temp in the HLT (http://www.homebrewstuff.com/2000-w-ss-heat-stick-w-weldless-gasket-kit.html) and am looking for an affordable yet accurate way to control...

I have this same question on theelectricbrewery.com but figured I might as well ask here also: I am new to electric brewing and I will be slowly transitioning to an electric HERMS setup. I am starting with a 120v 1500w element in the HLT for herms only, will still be boiling with propane. I...