I’m trying to RDWHAHB, but this is kind of weird to me so I thought I would ask the question. This is my first time after 15 years of Brewing getting into water chemistry And using my tapwater instead of store-bought spring water since I got a new water filter at my home.. Got a Ward labs report, and put it into Bru’n water for my house porter and brewed today. I didn’t actually do that much additions: 2.4 g calcium chloride added to the mash water, and 1.5 g calcium chloride added to the sparge water. In addition, I added 24.3 mL of 10% phosphoric acid to the sprage water as dictated in the spreadsheet. That’s all. The weird thing is after I added the calcium chloride and phosphoric acid to the sparge water and it was heating up, it turned milky opaque and after I ran it out of the hot liquor tank, there was a bunch of white sediment on the hot liquor tank and heating element. It did not happen with the mash water. I’m assuming it has something to do with the acid. Did I calculate wrong or do something else incorrect that caused The precipitate? Will it affect the final beer? Also kind of weird today that my buckets of starsan to sanitize my conical we’re kind of cloudy as well. Any input. Thanks. Just for reference, this is the ward labs report. By the way, I hit 5.55 pH in my mash which is pretty much what I was going for. Thanks in advance.
Ph 8.3
TDS est, ppm 311
Electrical conductivity, mmho/cm 0.52
Cation/Anion me/L 5.3/4.9
ppm
Na. 48
K. 2
Ca. 49
Mg. 8
Total Hardness, CaCO3 156
Nitrate. 0.2 SAFE
Sulfate. 21
Cl. 30
CO3. 1.8
Bicarbonate, HCO3. 163
Total Alkalinity, CaCO3. 136
Total P. 0.02
Total Fe. <0.01
Ph 8.3
TDS est, ppm 311
Electrical conductivity, mmho/cm 0.52
Cation/Anion me/L 5.3/4.9
ppm
Na. 48
K. 2
Ca. 49
Mg. 8
Total Hardness, CaCO3 156
Nitrate. 0.2 SAFE
Sulfate. 21
Cl. 30
CO3. 1.8
Bicarbonate, HCO3. 163
Total Alkalinity, CaCO3. 136
Total P. 0.02
Total Fe. <0.01