TJTHEBEST
Well-Known Member
Possibly changing directions. After the whole 3/4 wire dryer debacle ive decided that maybe i should try a little bit safer of a way to do this.
I discovered i have one of those breakers that is a 20 amp breaker but has 2 of those switches on it. as shown in the picture with the breaker labeled service outlet.
This feeds two receptacles that are right next to each other. My question is: Can i use those 2 receptacles in order to build a control panel with (2) 2,000 watt elements? What im unsure of is if these are 2 separate circuits.
This would be the wiring diagram that i would like to follow.
What say you all?
I discovered i have one of those breakers that is a 20 amp breaker but has 2 of those switches on it. as shown in the picture with the breaker labeled service outlet.
![IMG_20121211_172841.jpg](https://proxy.imagearchive.com/b79/b7914608b8491a1d3d8de45bfa8fef8c.jpg)
This feeds two receptacles that are right next to each other. My question is: Can i use those 2 receptacles in order to build a control panel with (2) 2,000 watt elements? What im unsure of is if these are 2 separate circuits.
This would be the wiring diagram that i would like to follow.
![auberinwiring1a42000wbi.jpg](https://proxy.imagearchive.com/e52/e5209d732921597cc8be3ccbb88e8fac.jpg)
What say you all?