I'm building a wire-rack stand based upon three-sections of 18"×18" wire racks.
With two kits (Muscle Rack 59 in. H x 18 in. W x 18 in. D 5-Shelf Wire Chrome Finish Commercial Shelving Unit) for about $75 total, I can get the 8 poles and 10 shelves needed.
B=Burner
K=Kettle
LP=LP Tank
MT=Mash Tun
HLT=Hot Liquor Tank
P=Pump
Not labeled, Counterflow chiller
the thick lines represent the shelving sections.
Cheers!
With two kits (Muscle Rack 59 in. H x 18 in. W x 18 in. D 5-Shelf Wire Chrome Finish Commercial Shelving Unit) for about $75 total, I can get the 8 poles and 10 shelves needed.
I was inspired by the 3-Tier shelf converted to brew cart post by @greeney87. But without the need cutout holes in the shelves.
Looking for any thoughts or advice on this setup.
Below is my rough schematic I plan to build.Looking for any thoughts or advice on this setup.
B=Burner
K=Kettle
LP=LP Tank
MT=Mash Tun
HLT=Hot Liquor Tank
P=Pump
Not labeled, Counterflow chiller
the thick lines represent the shelving sections.
Cheers!
Last edited: