Eu - Hi Sophia, we are debating about the usage of your 5L mini kegs/growlers at the brazilian forum "Home Brew Talk". At the moment our big doubt is if the keg is able to hold the required pressures for forced carbonation. Tipically we can set the pressure of a keg until up to 40 psi to carbonate the beer and primary information we have report that your mini kegs and dispensers are set to only 25 or 30 psi. So I would like to check with you about this information so all the members from our forum can get it precisely and decide if we are going to buy from your distributor in Brazil or not.
Eu - The product we are discussing is this one:
https://wholesaler.alibaba.com/prod...spm=a2700.8304367.prewdfa4cf.4.38e849a5sPbCJQ
Supplier -
Hi Cristiano, the filling pressure of this keg is 60psi. In fact, the Kegs can hold more than 200psi.
Eu - Ok, this is great. And how about the tap dispenser with ball lock connectors? Which is the maximum pressure?
Supplier - There is no problem with the ball locks and other accessories.
Supplier - We have supplied these producets for years and there has never been any problem with pressure.
Eu - Hi, I didn't say there was any problem about the tap dispenser. I just asked you the maximum pressure it can handle.
Supplier - There has never been any person who talk about the max pressure about the ball lock, so I only can tell you that there is no problem with it.
Supplier - You can buy from our distributor without any worry. They can also give you local support.
Supplier - Thank you very much for your questions. Hope we can work together.
Eu - I understand but you are the supplier. I won't buy and won't recommend it to my friends unless we have sure about the product's quality and safety. Without any sure about the tap dispenser's pressure I won't buy it either recommend it.
Eu - I hope you can understand. It's a safety matter.
Supplier - The whole dispenser can hold more than 200 psi
Eu - So, the PRV (pressure relief valve) at the top of the lid will only open when the pressure reaches 200 psi?
Supplier - no
Supplier - 30psi
Supplier - The pressure is customizable, but for beer, 30psi is enough. When the pressure in the keg is more than 30psi, the gas will get out of the keg from the valve.
Supplier - Do you need to change the pressure of the valve?
Eu - That could be interesting if we could set the pressure of the valve to 40 or 50 psi. What changes must be done?
Supplier - You can just tell you the pressure you need. However, the MOQ should be 300pcs