GutoSchettini
Member
- Joined
- Mar 21, 2015
- Messages
- 13
- Reaction score
- 2
Dear all,
I'm a beginner in electric brewing... I bought a RIMS tube (Brewhardware), than the PID (Mypin TD4-SNR+SSR) and the temperature probe (RTD PT-100, 3 wires).
After puzzling for a while (reading forums & watching youtube movies), I wired everything in the right way. However, playing with the PID and temperature, I noticed that when the PV is lower than SV, the OUT1 led (and the one in the SSR too) flashes instead of be continuously 'on'. Also, the autotunning takes a lot of time to finish (>20 minutes).
Definitively, it doesn't behave like the one showed in this film
[ame]https://www.youtube.com/watch?v=KFVcrtQ_pdQ[/ame]
My conclusion is that I got a defective unit and will return it. But I would like to hear from you who has experience with this controller. Has anyone had a similar problem?
Thank you!
Guto
I'm a beginner in electric brewing... I bought a RIMS tube (Brewhardware), than the PID (Mypin TD4-SNR+SSR) and the temperature probe (RTD PT-100, 3 wires).
After puzzling for a while (reading forums & watching youtube movies), I wired everything in the right way. However, playing with the PID and temperature, I noticed that when the PV is lower than SV, the OUT1 led (and the one in the SSR too) flashes instead of be continuously 'on'. Also, the autotunning takes a lot of time to finish (>20 minutes).
Definitively, it doesn't behave like the one showed in this film
[ame]https://www.youtube.com/watch?v=KFVcrtQ_pdQ[/ame]
My conclusion is that I got a defective unit and will return it. But I would like to hear from you who has experience with this controller. Has anyone had a similar problem?
Thank you!
Guto