idrinkstuffnthings
Well-Known Member
- Joined
- Jan 23, 2013
- Messages
- 135
- Reaction score
- 5
Hey guys/girls. Have had a keg setup for a couple months now. I seem to be missing something as I can't seem to get my pressure where I want it. Set at 10psi and a day later it's too high, set lower and it's too low etc. is there a good way to set regulator and know its at the right psi. I am now trying this method. Close valve on output of regulator. Open tank, then open reg until it hits 10psi. In theory I would think against a closed valve this 10 psi should be the final pressure once the keg is equalized? Any tips on how to get the pressure right would be appreciated. I have opened the output and its reading about 7 psi. So hopefully it ends up at 10 in a few days