Search results

Hi, Can anyone explain what's wrong with this pump? I'ts been working on and off, 2 sec on 10 sec off. I've tried replacing the starter realy without success.

This is my sanke keg fermenter washer. I used a small dish washer, took the sprinklers out and drilled a hole on the top, works pretty good, once I'll find a way to spray the water (spary ball , nozzle ,???) it will work great.

That's a concept version of my bottling station. The bottle filler is pretty standard. most parts which in contact with the beer are stainless, execpt the co2 ball valve on the left. The needle valve was replaced with adjustable pressure relief valve. I've mount it on a piece of...

Hi, What do you think of the idea of using a stainless sink for mashing? The one I have is 20 x 27 x 9 (L x W x H) inches, which is pretty shallow. also not sure what fittings to use for the drain hole. Royi

What do you think of using an immersed plate chiller with cold water circulation for fermentation temperature control. The wort, obviously, won't be circulated. Did anyone tried that? Royi

Hi, Does anyone has a short PowerPoint presentation about home brewing, I would like to "educate" my colleagues from work. Something like 15 minutes will be great. Thanks, Royi

Hi, I'm looking for a pump to tranfer the mash, grains and wort, to the lautering tank. Currently own a little giant TE-5-MD-HC, will it do the job? Thanks Royi

That's my DIY bottles washer. 1/2" copper ring with 8 1/4" sprinkles. I didn't use T's to connect the tubes, just drilled the 1/2" tube with 6.5mm bit, and soldered the 1/4" spikes. tried it with my brewing pump and it worked pretty good, recycled hot water through the bottles, took me...

Hi, I'm trying to automate my brewery and using this board. It's usb powered and has a 10 bit adc input among other IO's. Which temperature sensor do you think will fit this board? I was thinking of LM35/34 but wasn't sure if the usb voltage supply is stable enough for it...

Hi, I want to automate my brewing system with thisboard . I've tried to concet LM35 to one of the 10 bit ADC inputs. once I pluged the USB the sensor got very hot, and I didn't got reasonable readings. Not sure why, maybe because the voltage supply from the board is not stable enough for...

Hi, I want to upgrade my brewing Urn with an integrated all copper CFC, something like this, when the pump is constantly connected to the chiller for the inner tubing I want to use 1/2 OD coil, not sure yet about the outer tubing diameter. What do you think will be the minimum length that...

Won it on ebay the other day. http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=290463113815&ssPageName=ADME:L:PMR:US:1123#ht_1033wt_1053 Does it fit our kind of usage (mostly hot wort transfer )?

Hi everyone, I wanted to show you my new setup, It's a one vessel electric brewing system. There are actually two vessels Main tank is a 40 Liter electric water Urn with a hole drilled at the bottom. Grain tank is a 18 Liter plastic bucket with the bottom cut off. The concept...

Hi, I'm about to visit the US for the first time in a week, I would love to get Recommendations about small breweries/brewpubs I can visit in north NJ/Boston area. Thanks, Royi

Hi Guys, Do you know if and how I can connect a ranco temperature controller to a SSR? The problem is that the ranco output is 110-220V and the SSR input signal should be low DC voltage.

I scorched the top part of my electric element on my last brew. what do you say , should I still use it?

I looked everywhere but couldn't figured out if the TET612 has a manual operating mode for controlling a BK element. does anyone know? thanks New PID SSR TEMPERATURE CONTROLLER FURNACE KILN OVEN - eBay (item 300321038940 end time Jun-12-09 19:01:14 PDT)

Hi guys, I've just won this pump on Ebay, What do you say, is it suitable for brewing? my only concern is that It's rated for only 200F. Royi, Israel