QuercusMax
Well-Known Member
I picked up a 1/4"->1/8" adapter from Amazon (http://www.amazon.com/gp/product/B000BOAA6O/?tag=skimlinks_replacement-20) and purchased the Blichmann conversion kit, along with a quick-disconnect extension hose, and hooked everything up; all the pieces connect up appropriately.
Now my problem is that I can't get a nice blue flame; I get 2-foot-high yellow-orange flames, which doesn't seem right. Even when I adjust the needle valve all the way down, the flame is still orange. I've adjusted the air intake on my burner so it's wide open, and it doesn't seem to make any difference.
Do I need a different burner? Or maybe a smaller orifice?
Now my problem is that I can't get a nice blue flame; I get 2-foot-high yellow-orange flames, which doesn't seem right. Even when I adjust the needle valve all the way down, the flame is still orange. I've adjusted the air intake on my burner so it's wide open, and it doesn't seem to make any difference.
Do I need a different burner? Or maybe a smaller orifice?
Last edited by a moderator:
