piperbrew
Well-Known Member
See below table for the item, price, and comments. PM me if you're interested in all/most of the lot.
I'd prefer sell local, however if you're willing to cover the cost of shipping let me know what you're interested in and your zip and if I have a box that can fit whatever you're wanting I'll let you know the shipping cost.
I'd prefer sell local, however if you're willing to cover the cost of shipping let me know what you're interested in and your zip and if I have a box that can fit whatever you're wanting I'll let you know the shipping cost.
Item | Model | Price | Comment |
Corny Keg | Ball Lock (5 gal) | $45 | Thoroughly cleaned, brand new o-rings. Holds pressure with no issues. |
Corny Keg | Ball Lock (5 gal) | $45 | Thoroughly cleaned, brand new o-rings. Holds pressure with no issues. |
Corny Keg | Ball Lock (5 gal) | $45 | Thoroughly cleaned, brand new o-rings. Holds pressure with no issues. |
Corny Keg | Ball Lock (5 gal) | $45 | Thoroughly cleaned, brand new o-rings. Holds pressure with no issues. |
Corny Keg | Ball Lock (5 gal) | $40 | Crack next to one handle. Can use epoxy or glue to fix. Thoroughly cleaned, brand new o-rings. Holds pressure with no issues. |
Corny Keg | Ball Lock (5 gal) | $40 | Bottom rubber is loose. Can use epoxy or glue to fix. Thoroughly cleaned, brand new o-rings. Holds pressure with no issues. |
Corny Keg | Ball Lock (5 gal) | $45 | Has a "Level Sense" dip tube; not sure exactly what it does. Thoroughly cleaned, brand new o-rings. Holds pressure with no issues. |
Corny Keg | Ball Lock (5 gal) | $45 | Has a "Level Sense" dip tube; not sure exactly what it does. Thoroughly cleaned, brand new o-rings. Holds pressure with no issues. |
Corny Keg | Ball Lock (5 gal) | $45 | Has a "Level Sense" dip tube; not sure exactly what it does. Thoroughly cleaned, brand new o-rings. Holds pressure with no issues. |
Can typically swap it when it's empty. The plastic cap is still over the threads, which would imply it's full, however it does not feel as heavy as the 10 lb tank, so not sure about the amount of CO2. | |||
Can typically swap it when it's empty. Seems to still have a good amount of CO2 left. | |||
Can typically swap it when it's empty. Seems to still have a good mount of CO2 left. | |||
CO2 Regulator | Ashcroft Brand | $15 | |
Grain Mill | JSP Maltmill | $50 | As best I can tell, this looks to be a Model P (pre-adjusted) Rollers still look in good shape and should clean up nicely. |
Igloo Cooler Mash Tun | $15 | Good condition, just needs to be cleaned. Comes with a homemade filter screen, and spigot is replaced with brass valve. | |
Pump | Teel 135-036-10 | $45 | *Disclaimer: I did not wire this pump, so I can't speak to the reliability of the wiring. You can always rewire it however you want. I'll confirm it functions properly once I get some tubing to run some water through it. |
Immersion Chiller with Hose and Fittings | Anvil Foundry (Stainless)- 25' x 3/8" | $45 | Received with my Foundry, but never used. Comes with PVC tubing and sink attachment. |
Wort Aerator / Wine Degasser | Wine Agitating Rod Fizz-X | $8 | Don't recall the original manufacturer, but the link is a similar style. |
Immersion Chiller | Copper - 25' x 3/8" | $30 | |
Immersion Chiller (Copper) | 1/2" Tubing 8.5" D x 8" H (coil section) | $20 | Homemade chiller. Includes hosing and attachments on both ends. |
Draft Beer Shanks (Stainless) | 4 1/8" (x2) 5 1/8" (x1) | $20 each | New, never used. Each comes with 90* 1/4" barb |
Carbonation Cap (Stainless) | Fits most plastic drink bottles | $5 |
Last edited: