arringtonbp
Well-Known Member
Like many people here I am building a propane RIMS system where the propane is controlled with the Honeywell valves. I am trying to figure out the propane line. I will have one high pressure burner and one low pressure burner. Here's what I'm thinking:
Propane tank
'--> HP regulator
'--> T joint --> Ball valve --> Burner (BK)
'----> LP Regulator
'--> T joint --> Ball valve --> Honeywell Valve --> Burner (MLT)
'----> Ball valve --> Honeywell Valve -->Burner (HLT)
Here are my questions:
1. Will a regulator like this work: https://www.amazon.com/dp/B0014E3MSI/?tag=skimlinks_replacement-20
2. Should I install drip legs downstream of the honeywell valves?
3. With the above style of regulator, do I need to be concerned about output when it comes to heating up the water in the HLT? Will I output enough heat to do step mashes?
4. A friend of mine recommended this regulator, but I think it may be overkill. http://www.mosierindustrial.com/wp-...traight-Regulator-R622-BCF-262718793393-2.jpg
Any advice you can give me to help would be much appreciated.
Propane tank
'--> HP regulator
'--> T joint --> Ball valve --> Burner (BK)
'----> LP Regulator
'--> T joint --> Ball valve --> Honeywell Valve --> Burner (MLT)
'----> Ball valve --> Honeywell Valve -->Burner (HLT)
Here are my questions:
1. Will a regulator like this work: https://www.amazon.com/dp/B0014E3MSI/?tag=skimlinks_replacement-20
2. Should I install drip legs downstream of the honeywell valves?
3. With the above style of regulator, do I need to be concerned about output when it comes to heating up the water in the HLT? Will I output enough heat to do step mashes?
4. A friend of mine recommended this regulator, but I think it may be overkill. http://www.mosierindustrial.com/wp-...traight-Regulator-R622-BCF-262718793393-2.jpg
Any advice you can give me to help would be much appreciated.
Last edited by a moderator: