- Joined
- Feb 15, 2008
- Messages
- 54
- Reaction score
- 5
So, I've got a couple of these old 10 gallon kegs. They have no markings on them, other than a serial number. The in/out posts on them are ball lock, but the thread sizes are different than my 5 gallon corny kegs.
The bev out dip tubes are also a little bit bigger than the 5 gallon kegs. They also have these weird plastic inserts that go between the poppet and the dip tube. There is no gas in dip tube.
One of these suffered a bit of an accident and one of the posts is pretty bunged up.
Can anyone point me in the right direction of where I can buy some replacement in/out post assemblies?
Thanks in advance for your help!
The bev out dip tubes are also a little bit bigger than the 5 gallon kegs. They also have these weird plastic inserts that go between the poppet and the dip tube. There is no gas in dip tube.
One of these suffered a bit of an accident and one of the posts is pretty bunged up.
Can anyone point me in the right direction of where I can buy some replacement in/out post assemblies?
Thanks in advance for your help!