- Joined
- Nov 24, 2017
- Messages
- 171
- Reaction score
- 82
I am putting my gas panel together for my Keezer. I have a 10 lb CO2 tank connected to a Primary Regulator tubed to a 3-Valve Secondary Regulator. Two ports of the secondary are tubed to 4-Valve Manifolds. All ports on the manifolds are off. I open the tank and adjust the regulator valves so I read something then shut the tank valve. All gauges hold pressure. I have sprayed the connections with soapy water and see no evidence of leaks. I come back after 6 to 8 hours and the gauges have dropped some. Come back the next morning and they are zeroed out. Is this normal or is this still considered a leak that needs to be resolved?
Thanks.
Thanks.
Last edited: