zachattack
Well-Known Member
- Joined
- Mar 6, 2012
- Messages
- 2,808
- Reaction score
- 323
I have a used Vissani that I use with a temp controller, but the door has developed a slight gap at the top when closed.
I know this is probably impossible to diagnose this way, but I was wondering what I could do to correct that? Replace the seal?
The glass door is easily removed, I've done it a few times. I'm at work so I'm not looking at mine right now, but most likely the bolts at the top have loosened a bit, the door rests on a pin on the bottom and is held in place by a sliding metal plate at the top. Loosen the bolts, force the door shut, tighten the bolts back up.