Raisoshi
Well-Known Member
I've been using the table under "Conversion Efficiency" to determine if I got full conversion, and have abandoned the iodine test.
Here's the link: http://www.braukaiser.com/wiki/index.php?title=Understanding_Efficiency#Conversion_efficiency
I was trying to find a way to use Beersmith in order to get a more accurate value based on the grain bill without assuming the 80% fine grind extract and 4% moisture content.
So I input 100% mash efficiency, zeroed all the losses, and entered batch volume 30l and 10kg of pilsner malt. Modified the pilsner ingredient sheet so it said 80% yield and 4% moisture content.
This is 3l/kg or 1.44qt/lb and according to the table it should provide 1.085 wort. Beersmith says 1.102 though.
What am I missing?
Here's the link: http://www.braukaiser.com/wiki/index.php?title=Understanding_Efficiency#Conversion_efficiency
I was trying to find a way to use Beersmith in order to get a more accurate value based on the grain bill without assuming the 80% fine grind extract and 4% moisture content.
So I input 100% mash efficiency, zeroed all the losses, and entered batch volume 30l and 10kg of pilsner malt. Modified the pilsner ingredient sheet so it said 80% yield and 4% moisture content.
This is 3l/kg or 1.44qt/lb and according to the table it should provide 1.085 wort. Beersmith says 1.102 though.
What am I missing?