Thundercougarfalconbird
Well-Known Member
- Joined
- Dec 16, 2010
- Messages
- 760
- Reaction score
- 25
So I just got this used brutus from a buddy of mine. The burners are the same banjo's that blichmann uses. My regulator is this one (http://www.amazon.com/dp/B0009F709A/?tag=skimlinks_replacement-20)
How high should I turn up the regulator? I turned it up all the way and saw flame licking out of the intake(?)
When I turn it up really high I no longer see flames, but I'm doing it in daylight so I assume its the blue flame I'm seeking, but at this range I'm afraid of flame coming out of the intake again.
How open should the intake be?
The burners are a little rusty so I took a dremel to them and cleaned out every little hole. I still have a orange sooty flame.
The burners just don't feel very safe. I was just looking for some advice before I trust this thing on a brew.
How high should I turn up the regulator? I turned it up all the way and saw flame licking out of the intake(?)
When I turn it up really high I no longer see flames, but I'm doing it in daylight so I assume its the blue flame I'm seeking, but at this range I'm afraid of flame coming out of the intake again.
How open should the intake be?
The burners are a little rusty so I took a dremel to them and cleaned out every little hole. I still have a orange sooty flame.
The burners just don't feel very safe. I was just looking for some advice before I trust this thing on a brew.
Last edited by a moderator: