For heavy duty platforms inside my brew fridges I used 3/4" plywood. Cut to pick up the original shelving supports molded into the liners on my two smaller 17cf fridges, with added center and/or front supports as needed. Ironically that wouldn't work on the 22cf fridge (food compartment is actually shorter!) so I had to add supports on the sides, back, and down the middle. I don't ferment in the 22 so no reptile bulb heater nor fan.
I've had as many as 5 full kegs on the two smaller 17cf fridges and 6 full kegs on the 22cf unit.
Cheers!
I've had as many as 5 full kegs on the two smaller 17cf fridges and 6 full kegs on the 22cf unit.
![fridge1_platform_sm.jpg fridge1_platform_sm.jpg](https://cdn.homebrewtalk.com/data/attach/662/662959-fridge1-platform-sm.jpg)
![fridge2_platform_sm.jpg fridge2_platform_sm.jpg](https://cdn.homebrewtalk.com/data/attach/662/662958-fridge2-platform-sm.jpg)
![fridge3_platform_sm.jpg fridge3_platform_sm.jpg](https://cdn.homebrewtalk.com/data/attach/662/662957-fridge3-platform-sm.jpg)
Cheers!