seabush
Member
- Joined
- Dec 29, 2016
- Messages
- 24
- Reaction score
- 9
Not a new idea I’m sure, but I wanted to share how I use my QuickCarb to clean my beer lines after every keg. My intertap faucets have a growler adapter that I connected to a normal flare fitting (there is now a ball lock QD faucet adapter from intertap that would make this even easier).
My input is hot water to flush out the beer then I recirculate with Oxyclean and hot water for 20 mins. Flush with hot water, then with starsan and the. I just let it sit u til my next keg goes in
For the output, I used a bottle carbonater, like the one used for carving up 2 liters, because I stupidly used QDs with barbs instead of flare fitting.
I also wired in an inline light switch. I found trying to unplug the adapter from the wall or the pump with wet slippery hands was difficult and dangerous.
My input is hot water to flush out the beer then I recirculate with Oxyclean and hot water for 20 mins. Flush with hot water, then with starsan and the. I just let it sit u til my next keg goes in
For the output, I used a bottle carbonater, like the one used for carving up 2 liters, because I stupidly used QDs with barbs instead of flare fitting.
I also wired in an inline light switch. I found trying to unplug the adapter from the wall or the pump with wet slippery hands was difficult and dangerous.