Hey, check these upcoming products out!
Here's a mini hopback designed to hold exactly one ounce of leaf hops. It has integrated camlocks just like our RIMS units. It can be set on a flat surface or mounted to your brewstand as shown in the pic.
Here's a purpose-made heatstick with minimalist parts. Yes, we've all seen the units built with drain pipe but I'm sorry I don't roll like that. We start with a 2" sanitary flange and weld a block off plate on the back (along with an internal sturdy grounding lug). A vertical tubing for electrical connection and handling is welded to the top of the canister. The element is installed into a 2" TC cap threaded to 1" NPS and that clamps on to the enclosure with a silicone gasket in place. At first release it will be a hardware only solution, you add your element and cord. We're still working on ways to clip it to your kettle and how to integrate an RTD or thermocouple right into the unit so it moves with the stick from vessel to vessel.
As always, we appreciate your feedback.
Here's a mini hopback designed to hold exactly one ounce of leaf hops. It has integrated camlocks just like our RIMS units. It can be set on a flat surface or mounted to your brewstand as shown in the pic.
Here's a purpose-made heatstick with minimalist parts. Yes, we've all seen the units built with drain pipe but I'm sorry I don't roll like that. We start with a 2" sanitary flange and weld a block off plate on the back (along with an internal sturdy grounding lug). A vertical tubing for electrical connection and handling is welded to the top of the canister. The element is installed into a 2" TC cap threaded to 1" NPS and that clamps on to the enclosure with a silicone gasket in place. At first release it will be a hardware only solution, you add your element and cord. We're still working on ways to clip it to your kettle and how to integrate an RTD or thermocouple right into the unit so it moves with the stick from vessel to vessel.
As always, we appreciate your feedback.