ggoodman said:Assuming you are using soda kegs... no kegs are rated for max thirty and tested to 50. it might hold 100psi it might not. I would not try it.
On a different thread, one of the posters used 1/8 line to reduce the flow rate from his carbonator setup.
https://www.homebrewtalk.com/f95/carbonator-installed-261089/
I plan to copy his carbonated water setup. I figured that if 1/8" line works for the carbonator at 80 psi, then maybe I could push premixed soda at the same pressure using 1/8" line. Then I could use one regulator for the carbonator and to push premixed soda.
From my understanding, the smaller line drops the pressure from 80 psi enough to use a beer faucet at reasonable flow rates.
Ramdough said:On a different thread, one of the posters used 1/8 line to reduce the flow rate from his carbonator setup.
https://www.homebrewtalk.com/f95/carbonator-installed-261089/
I plan to copy his carbonated water setup. I figured that if 1/8" line works for the carbonator at 80 psi, then maybe I could push premixed soda at the same pressure using 1/8" line. Then I could use one regulator for the carbonator and to push premixed soda.
From my understanding, the smaller line drops the pressure from 80 psi enough to use a beer faucet at reasonable flow rates.
Enter your email address to join: