Matt, Thanks! I’ll check into the BrewPi controller and BrewBlox. Brew on. Edit: I read through some of the BrewBlox documentation and I think this will work. This looks like a great piece of software. Wow! Thanks again for responding.The Brewpil controller does but would require that you run the BrewBlox software on a Raspberry Pi or other small computer (I run mine on a mini PC) and use the browser-based software to run your process.
I use it for my cold side and like it. I’ve considered retrofitting my hot side panel to run off BrewBlox as well but haven’t pulled the trigger yet.
Thanks!I recently bought a used BCS462 system. It connects to the network via ethernet, but I don't have ethernet in my home. I found this on Amazon, and now have WiFi access to the system.
SmartPID works for me, integrates with brewfather as well. Worth a look.Smart PID has a solution
https://smartpid.com/
Thanks for the info.Auber recently released a PID DIN with wifi. I have a few but have not made the swap in my control panel yet.
Wi-Fi 1/16 DIN PID Temperature Controller (For SSR)
https://www.auberins.com/index.php?main_page=product_info&cPath=1&products_id=1056
- Model: AW-SYL-2352
Thanks! Yes, this looks very promising. I’m glad to hear it’s working for you.SmartPID works for me, integrates with brewfather as well. Worth a look.
Ballartguy, Inkbird’s are great controllers. Tough and reliable. I use one as a backup in case my homebrew Raspberry Pi controller goes bad for some reason. Thanks for responding! Brew on.Inkbird wifi temperature controller plug and play
Brewpil controller does but would require that you run the BrewBlox software on a Raspberry Pi or other small computer (I run mine on a mini PC) and use the browser-based software to run your process.
I use it for my cold side and like it. I’ve con
Is there a way to push recipes to the controller from Brewfather?I am clearly biased here as we manufacture the gear but our RAPT temp controllers do have a PID feature on them already so if you are looking for a turnkey solution then you might consider this item that Williams Brewing Sell:
RAPT Temperature Controller
I believe that www.morebeer.com will also get stock soon too.
They might be more expensive than the Inkbird or Rasberry Pi option but it's a turnkey plug and play solution with colour screen. This device will:
1. Allow remote control of the device via the RAPT portal
2. If you install the app you can get push notifications to your phone|
3. It will log stuff to the web such as temp, signal strength, heating duty cycle, cooling duty cycle etc.
4. It can also be used as a bluetooth bridge for other RAPT devices such as the RAPT Pill Hydrometer.
5. It is also expandable to multiple temp probes if you pair other bluetooth thermometers like this one. When you pair additional probes both sets of data will log to the RAPT portal and be overlaid on the same graph. It essentially works as a bluetooth bridge and relays low energy bluetooth data back to the internet via wifi.
6. It will also allow profile control for brewing or fermenting profiles. (this is getting upgraded at the moment to allow more complex profile management)
If any of you guys have used this in America so far we would be keen to get some feedback from you as I think they only recently landed in USA.
Enter your email address to join: