Update:
I had a little mold grow in my chamber because I cooled it down, and let it come back up too quickly. Also, as the weather has cooled off, the A/C compressor would turn off leaving just the fan running. The fan would actually heat the inside of the chamber up to the high 70's. Yesterday I pulled the A/C out and bypassed the factory temperature switch so it will run when the controller tells it to without interference from the factory switch. I have to clean the mold out, and get the insulation I removed put back in. On my next batch I'm gonna either run the A/C fan 24/7, or finally get a power supply for the computer fans I bought. I also learned not to increase the temperature too fast. That's where my condensation came from. It basically sat there for a day and a half or more just sweating. Having a fan running that whole time may have minimized it. Either way, I'm not gonna raise the temp more than a couple degrees a day from now on. That way the A/C will have a chance to kick on and remove the moisture.