just wanted to share how i mounted my march 809s and my cfc on to brew rig I'm building. In the past Ive mounted them in various way, but was alway a bit put off on how they ended up being mounted.
For this rig I used Superstrut conduit channell, and 3in Pipe straps to hold the Pumps in place.
I found they hold the pumps very secure, and I did not have to yard down on the clamp. I was worried that if i tightened to much on the clamp I might bend the pump casing, but this is not the case. Another benefit is that the clamps can be loosened and moved along the channel very easily.
For the CFC, I simply bolted it to the Channel with 1/4in bolts using fender washers.
For this rig I used Superstrut conduit channell, and 3in Pipe straps to hold the Pumps in place.
I found they hold the pumps very secure, and I did not have to yard down on the clamp. I was worried that if i tightened to much on the clamp I might bend the pump casing, but this is not the case. Another benefit is that the clamps can be loosened and moved along the channel very easily.
For the CFC, I simply bolted it to the Channel with 1/4in bolts using fender washers.