I'm at my breaking point. I decided to try the BrewPi DIY with a manual install on an old PC system I have. I installed Debian, hooked up the hardware, and had seemingly some success with the initial install. Now I'm stuck.
I have been following these instructions
http://diybrewpi.wikia.com/wiki/Setting_Up_Your_RPI
and am now stuck at "Run sudo ~/brewpi-tools/install.sh this may take some time depending on what version of RPI you have and how fast your internet connection is." The response is "command not found".
Some of the other issues:
- I can't figure out what my IP address is to get the web interface, and the ones I've tried don't work.
- I can't even verify if my machine is talking to the Arduino through the USB. (It does not appear as a drive when looking at my drives and the yellow "L" LED blinks continously)
- The Arduino IDE program gives me errors with my WIFI setup, though I have been downloads the programs and files over WIFI into Linux.
I've put a fair amount of time into this, and am exceptionally stubborn, so I'm not yet ready to breakdown and just buy a Raspberry Pi. Can anyone help get me back on track?
Disclosure: I know virtually nothing of Linux script, web servers, etc.
I have been following these instructions
http://diybrewpi.wikia.com/wiki/Setting_Up_Your_RPI
and am now stuck at "Run sudo ~/brewpi-tools/install.sh this may take some time depending on what version of RPI you have and how fast your internet connection is." The response is "command not found".
Some of the other issues:
- I can't figure out what my IP address is to get the web interface, and the ones I've tried don't work.
- I can't even verify if my machine is talking to the Arduino through the USB. (It does not appear as a drive when looking at my drives and the yellow "L" LED blinks continously)
- The Arduino IDE program gives me errors with my WIFI setup, though I have been downloads the programs and files over WIFI into Linux.
I've put a fair amount of time into this, and am exceptionally stubborn, so I'm not yet ready to breakdown and just buy a Raspberry Pi. Can anyone help get me back on track?
Disclosure: I know virtually nothing of Linux script, web servers, etc.