Kegerator help

[Theo277]

I have a danby dkc586bl beer fridge and has been working great since I owned it. I went to tap a beer an it was pure head. I unplugged and repluged and nothing happens, no compressor or lights/ beeps from the control panel. When I unplugs the switch I get a slight beep. Any idea where I should start?

 

[Jaybird]

First things first are you sure the outlet has power? I know dumb question but we have to start somewhere. If yes look at the control power circuit on the Danby and make sure there isn't a control power fuse of breaker onboard the fridge. Do you have an electrical tester?
Cheers
Jay

 

[Theo277]

Sorry for the delay in my response. My wife pluged it back in the next day and it worked fine. There was power going to outlet the entire time, I tested it. I do have a electrical tester. Long story short the keg went flat and took awhile to finish. Picked up a new barrel and everything was fine. Then once again no power or compressor. Left it unplugged for 15 minutes and nothing. Then 30 min nothing and then I left it unplugged for 2 hours and it worked fine. Nothing was frozen or hot. I have had the unit for at least 6 years and never had this happen or anything else. Is there something going like the CPU or control panel? Thanks for your input and advice.
Cheers justin