mpcluever said:Kinda hard to see, but without that female end on there, I was able to crank it down just enough that the stone is touching the other side, but screwed in enough that it shouldn't leak.
http://i83.photobucket.com/albums/j309/mpcluever/asdf/2013-01-05_19-53-33_386.jpg
mpcluever said:Sorry, don't quite follow. It's a 1/2" Tee with came locks on both ends so it connects inline with my current system. The stone is kind of wide such that I worry a little bit about flow, but there's enough room going past it that it should be just fine. Looks like a 3/8" barb so I'll use 5/16" bev tubing and put air tool quick connects on such that I can just wrap it up with the Tee on the end and connect it all to the tank as needed.
mpcluever said:
Nice work. Let me ask you. when your chilling and running your wort through the plate chiller do you only make one pass? Do you open up your oxygen valve all the way when passing wort through..
Enter your email address to join: