Greetings all,
Having sold my Haier kegerator, I have upgraded to a Frigidaire Kegerator
FRTB7B4EMB.
At it's lowest setting (below 1 on the thermostat controller) the liquid temp of a water bottle was around 42 degrees. Not nearly cold enough for my taste. The manual's recommended setting was 5. I can only imagine the flat warm beer this setting would have poured...
I managed to remove the thermostat controller housing (4 bolts), disconnect the main connector, and access the thermostat.
UPDATE: Removing the thermostat controller housing is not necessary. Just pull the knob off the front and the set screw is easily accessible. Lesson learned!
After removing the knob, I was able to remove the thermostat. I found the thermostat set screw just to the right of the knob. It was set at about the 10 o'clock position. I have since adjusted it counter-clockwise to the 8 o'clock.
Here's to hoping! I took some pics in the event someone want's to make this modifcation to their Frigidaire. I found that they use the same controller unit on most of their top-freezer units.
Will return back here with the results. If this doesn't work, I'll be purchasing/installing the
ITC-1000 Temperature controller.