I have the edelmetal burner. I recently converted a keg to a kettle and my first 10 gallon batch took the burner about 45min to come to a boil for 13gal of wort. I know it runs on a 10psi regulator. Will swapping in a 30psi regulator help or is that dangerous? I'd hate to get another burner, but I don't want to wait 45min everytime for a boil unless this is normal for others? Thanks
edelmetal burner convert to 30psi?
- Thread starter bg1414
- Start date
Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:
I don't recommend messing with it, you risk blowing yourself up.
The burner that you have is close to the top end as far as low pressure burners go.
If you still insist it can be done, but I would go with a 10-20psi adjustable regulator.
Here is an example of a banjo burner with an adjustable pressure regulator:
https://www.amazon.com/dp/B01LTBH2UO/?tag=skimlinks_replacement-20
The burner that you have is close to the top end as far as low pressure burners go.
If you still insist it can be done, but I would go with a 10-20psi adjustable regulator.
Here is an example of a banjo burner with an adjustable pressure regulator:
https://www.amazon.com/dp/B01LTBH2UO/?tag=skimlinks_replacement-20
Last edited by a moderator:
