1. I picked up two BRAND NEW March AC-4A-MD 1/12hp pumps for my brew setup but decided that they are overkill for the 5-10gal e-brew BIAB setup I am building. These retail for >$300, but I purchased them for much less and would like to pass on the savings to someone who can put them to better use. They are 110V with 1" OD inlet and 3/4" OD outlet. They will do 21.5ft max discharge head and 14 gpm and have a polypropylene, Ceramic magnet, Ceramic, Buna N impeller unit construction rated to 190F. These will handle mash and chilled wort temperatures just fine, but I'd not advise using them to transfer boiling liquids (stainless and polysulfone heads available for 250F temp). SOLD SOLD SOLD! to atjsparty.
2. 4-prong 30A external mount dryer outlet. I went with a flush-mount and this is not needed for my setup. $10 shipped
3. 30A GFCI 220V Cutler-Hammer breaker. Used but tested and in working order. I purchased two as a lot and only need one. $50 shipped.
4. NEW- ONE Silicone O-ring plus a stainless washer sized for 1" heating elements to seal using the "Blichmann method". Silicone O-Ring has a 1-3/16" ID, 1-7/16" OD, 1/8" Width and 18-8 Stainless Steel Round Shim is 0.075" in Thickness, with a 1-1/2" ID, and 2-1/4" OD. $3 shipped for O-ring plus washer, can ship extra O-rings for an extra $.0.75 each.
4.5. Ten or so Silicone O-rings sized for 1" heating elements. Silicone O-Ring has a 1-3/16" ID, 1-7/16" OD, 1/8" Width. $1.50 Shipped + $.75 for each extra.
5. Mini 12V 108GPH high temperature pump. Was going to use for evaporative carboy-cooling setup but even smaller pump worked fine. Wired with a base, switch, and power adapter so it's good to go! Will re-circulate boiling wort, mash water, etc quietly and fairly rapidly. $35 shipped as shown, ready to go! SOLD TO res291que
Payment will be made via Paypal and I will ship small items via USPS 1st class mail and larger items by UPS ground. Thanks for looking!
2. 4-prong 30A external mount dryer outlet. I went with a flush-mount and this is not needed for my setup. $10 shipped
3. 30A GFCI 220V Cutler-Hammer breaker. Used but tested and in working order. I purchased two as a lot and only need one. $50 shipped.
4. NEW- ONE Silicone O-ring plus a stainless washer sized for 1" heating elements to seal using the "Blichmann method". Silicone O-Ring has a 1-3/16" ID, 1-7/16" OD, 1/8" Width and 18-8 Stainless Steel Round Shim is 0.075" in Thickness, with a 1-1/2" ID, and 2-1/4" OD. $3 shipped for O-ring plus washer, can ship extra O-rings for an extra $.0.75 each.
4.5. Ten or so Silicone O-rings sized for 1" heating elements. Silicone O-Ring has a 1-3/16" ID, 1-7/16" OD, 1/8" Width. $1.50 Shipped + $.75 for each extra.
5. Mini 12V 108GPH high temperature pump. Was going to use for evaporative carboy-cooling setup but even smaller pump worked fine. Wired with a base, switch, and power adapter so it's good to go! Will re-circulate boiling wort, mash water, etc quietly and fairly rapidly. $35 shipped as shown, ready to go! SOLD TO res291que
Payment will be made via Paypal and I will ship small items via USPS 1st class mail and larger items by UPS ground. Thanks for looking!