BrewinSoldier
Well-Known Member
- Joined
- Jul 13, 2015
- Messages
- 471
- Reaction score
- 52
Alright guys! I'm selling my full setup as I just can't keep my kegs full anymore with 5 gallon batches. I'm making a big jump and moving to 1BBL, with hopes of maybe opening a small tap room in the future(everyone's dream).
So here's what I have:
-Blichmann tower pump stand with March pump
-240v power adapter 6-50P
-Blichmann 240v Rims rocket
-Blichmann 10 gallon G2 electric boilmaker kettle (240v) with custom whirlpool arm
-Blichmann 240v electric tower of power control module.
So just for that stuff was $2k.
Then for the mash tun I have a SS Brewtech 10 gallon mash tun($400). I added all custom fittings into it with a 1.5" T.C. 3 piece butterfly valve that completely disassembles, the recirculation fittings and SS recirc circle.
Then for the HLT I have the 110v electric Williams Brewing HLT tank with an inkbird controller. I also have the original controller that it comes with but I didn't feel that it was working right. I put all quick disconnects stainless fittings on it as well.
All high temp silicone hoses with stainless quick disconnects cam fittings on everything.
Then it all sits on a 24x60 stainless steel table.
I've got roughly $3.5k or so into this system. I'll also include a few hundred bucks of stainless quick disconnects I have for it that I bought from morebeer.
Take it all for $2,500. It's an awesome system that I've been getting 85% efficiency on. I've brewed on it maybe 10 times.
Located in Manteca/Modesto area of California.
So here's what I have:
-Blichmann tower pump stand with March pump
-240v power adapter 6-50P
-Blichmann 240v Rims rocket
-Blichmann 10 gallon G2 electric boilmaker kettle (240v) with custom whirlpool arm
-Blichmann 240v electric tower of power control module.
So just for that stuff was $2k.
Then for the mash tun I have a SS Brewtech 10 gallon mash tun($400). I added all custom fittings into it with a 1.5" T.C. 3 piece butterfly valve that completely disassembles, the recirculation fittings and SS recirc circle.
Then for the HLT I have the 110v electric Williams Brewing HLT tank with an inkbird controller. I also have the original controller that it comes with but I didn't feel that it was working right. I put all quick disconnects stainless fittings on it as well.
All high temp silicone hoses with stainless quick disconnects cam fittings on everything.
Then it all sits on a 24x60 stainless steel table.
I've got roughly $3.5k or so into this system. I'll also include a few hundred bucks of stainless quick disconnects I have for it that I bought from morebeer.
Take it all for $2,500. It's an awesome system that I've been getting 85% efficiency on. I've brewed on it maybe 10 times.
Located in Manteca/Modesto area of California.