Use fermonsters with posts on the lids for transfers into kegs. Use a gas disconnect off the keg into a bucket of starsan to watch the bubbles and the inflow of beer. Usually I can transfer 5 g over in 15-20 min . Not yesterday. I try only 8 psi as these are plastic fermenters ( fermonster 7 g) and I love them for low oxidation. I took black post of the fermentor lid to clean out and even swapped to another . No difference. Tried another grey gas disconnect into the beer. No difference. Viewing the floating diptube in the beer the tube looked clear and the beer sure was as it sat for 37 days!!!!!
Tried to push co2 in through the beer post by changing to a black disconnect to blow out anything that could be clogged and did not see anything. Not a bubble?
Lots of co2 in tank. Did not want pressure to exceed 15 with the plastic.
Got the beer transfered but 45 minutes later???????
Any ideas what went wrong?
Tried to push co2 in through the beer post by changing to a black disconnect to blow out anything that could be clogged and did not see anything. Not a bubble?
Lots of co2 in tank. Did not want pressure to exceed 15 with the plastic.
Got the beer transfered but 45 minutes later???????
Any ideas what went wrong?