bowman5150
Well-Known Member
- Joined
- Feb 22, 2014
- Messages
- 125
- Reaction score
- 18
Opps must be the home brew!
Sent from my iPhone using Home Brew
Sent from my iPhone using Home Brew
Opps must be the home brew!
Sent from my iPhone using Home Brew
The exterior is actually 43 1/2" x 24 1/2" with the cardboard. Sorry about that.
Sent from my iPhone using Home Brew
Don't worry about missing it this time. They put them on sale all the time. I'll post how the refrigerator (actually is just the lowest freezer setting) setting works.
Sent from my iPhone using Home Brew
Best Buy has the Igloo 10 cu. ft. on sale again. I'm debating whether I should buy it or not. It's bigger than I need, but the extra room kind of gives me a small fridge for bottles and other drinks, plus I don't have to buy a temp controller. I assume still no issues with desired temps from anyone?
Sent from my iPhone using Home Brew
Does anyone have info on the Idylis 7.0 (here)?
I would like to put 3 ball locks and a 20# CO2 tank in it, but I can't find the interior dimensions to see if it would need a collar.
Any help would be appreciated.
Thanks, I fent and bought one.I have one. Interior virtually the same as the GE 7 cu.I can fit 3 pins and a 5# tank with no collar.
Frigidaire 14.8cf LFFN15M5HW
Download this specification sheet and layout as a high-resolution printable PDF at Dropbox.
________________________________
________________________________
________________________________
I can send a picture if necessary but the 9th keg will NOT fit without a collar by about a half an inch. All ball lock.
Does it miss by a little or a lot? Some people do well by rotating the kegs just right, because they're not usually round, but oval. Plus, a lot of people take a rasp to the rubber bumpers and that frees up a lot more space than you'd think.
Kenmore 19.7cf 16082
Download this specification sheet and layout as a high-resolution printable PDF at Dropbox.
________________________________
________________________________
________________________________
Danby 7.0cf DCF700W1
Download this specification sheet and layout as a high-resolution printable PDF at Dropbox.
________________________________
________________________________
________________________________
****WARNING****
Ball lock Cornelius kegs will not fit with the standard disconnects on. They are about 1/2" too tall and the lids rests on the lines where they exit the disconnects. The top must be spaced or the inside of the lid needs to be cut. I suggest a 3/4" spacer.
Also a 5# tank will not fit on the hump without a collar
Kenmore 8.8 cu ft 16922
Download this specification sheet and layout as a high-resolution printable PDF at Dropbox.
________________________________
________________________________
________________________________
Kenmore 8.8 cu ft 16949
Duplicate model of [post=5616149]Kenmore 8.8 cu ft 16922[/post].
Differences:
- Color -- black
Danby 3.6cf DCF401W1
Reserved.
Does anybody have pictures showing how to remove the hinges on the Danby 10 cubic chest freezer. I am also looking for instructions on re-attaching it to the collar.
Thanks
Sent from my iPhone using Home Brew
Igloo 7.2cf FRF472
Enter your email address to join: