I need to upgrade my smaller fermenter to a 1bbl so here it is up for sale. It is less than 2 years old and comes from Brewers hardware. It is a great fermenter with many options you can't find with the others out there. Here is the specs and you can view it on the website. I will include the 3" TC SS blow off cane I added from SS Brewtech ($55).
Price is $1200. I am in Mid Mich but travel alot so potential to meet 1/2 way is possible.
Standard Items Included with our Stainless Steel Conical Fermentors
Price is $1200. I am in Mid Mich but travel alot so potential to meet 1/2 way is possible.
- Massive 2" bottom dump valve. While a 1.5" dump should be considered the minimum size to be effective, it's often clogged by more flocculent yeast or trub sediment high in hop or protein material.
- Our lid design is a simple and easy to use Tri Clover compatible cap. No large and awkward lid with a proprietary gasket to deal with, Tri Clover Compatible gaskets are readily available and affordable enough to keep extras on hand. Our 15 gallon model has an 8" lid for easy cleaning. The lid features a 3" Tri Clover Compatible access port that mounts the included 1" blow-off fitting and can mount our 3" Tri Clover Compatible CIP Spray Ball. The lid also includes two 1.5" ports for addition accessories.
- Triple Sealed rotating racking arm. All of the higher end conical fermentors on the market have a rotating racking arm, but most are dependent on just the TC gasket to seal it. When you loosen the clamp to rotate the arm, you're faced with a tricky balance of loosening it enough to rotate without it leaking. We've solved that issue by adding 2 additional o-rings ahead of the Tri Clover compatible clamp attachment, eliminating the leaking issue and isolating that joint from your wort. The o-rings are captured on the arm itself so they are easily removed for cleaning and sanitizing. The ferrule on the body of the fermentor is a standard 1.5" ferrule with no special machining.
- Separate 1.5" Tri Clover Compatible temperature monitoring port includes a thermowell and dial thermometer or replace it with one of our TC flange-mounted temperature sensors for BCS-460 / BCS-462 or BrewTroller control.
- Includes a sample valve on a dedicated sample valve port.
Standard Items Included with our Stainless Steel Conical Fermentors
- 2" Tri Clover Compatible Butterfly valve for the bottom dump, including a 2" sanitary 90 degree elbow and 2" Tri Clover Compatible X 2" hose barb adapter
- 1" Tri Clover Compatible Butterfly valve for the rotating racking arm, including a 1/2" hose barb adapter
- 1.5" Tri Clover Compatible X 6" sanitary thermowell with 1/2" FPT inlet for the thermometer.
- 3" Face Dial Thermometer.
- 3" Tri Clover Compatible X 1" 90 degree hose barb blow-off fitting for the lid.
- All of the required clamps and gaskets to be able to use your fermentor when you get it.
- Overall height including 90* blow-off barb adapter: 41 1/2"
- Cylinder Diameter: 18.5" at outer jacket
- Cylinder Height of Straight Wall: 10 1/4"
- Cone Height: 14"
- Distance from Bottom Ferrule to Floor: 9.44"
- 2.15 square feet cooling contact area.
- 1/4" FNPT coolant inlet and outlet.
- 1.5" diameter legs with 1.5" Tri Clover compatible flanges for feet.
- Heavy Duty .118" (3mm) thick inner wall on jacketed versions.
- Jacket Design is such that the coolant is in contact with the inner wall.
- Outer wall is 1.5mm thick.