Search results

I buy my RTD's from Auber Instruments and they are 3-wire...2 reds and 1 white. I use the TA4 and have never had a problem.

We will have a meeting on the third sunday of the month of april at my house in cape.

I use a Mikro-Spray D-3 by Klenzade. I bought it at a dairy supply store in Michigan. You fill the bowl with about 1/2 gallon of iodophor, turn it to wash and it injects a measured amount of iodophor into the line. The D-3 is used as an udder washer. The thing must be ordered by the part. I...

I use a Mikro-Spray D-3 made by Klenzade. I bought it years ago at a dairy supply store in Michigan. It is made to use as an udder waher. It holds about 1/2 gallon of iodophor. When it is turned to wash, it injects a measured amount of iodophor into the line. If you look hard enough, you can...

It's not rocket science. [B]ajdelange[B] is making it too hard. I understand that you are just trying to get some information like where to buy a PID. I've built five different RIMS (Recirculating Infusion Mash System) over the last three years. I started out with a PID from Auber Instruments...

I don't know what all the noise is about the BM-23 being loud. I've had one for 25 years and it is no louder than my refrigerator. These are very nice units. I got mine from a closing restaurant and it was beat up pretty badly. Had to replace the top rail and lined the inside walls and cooling...

Chugger Pump, RIMS tube from Brewer's Hardware, PID from MYPIN and a SESTOS digital timer.

Chugger Pump, RIMS tube from Brewer's Hardware, PID from MYPIN and a SESTOS digital timer.

Chugger Pump, RIMS tube from Brewer's Hardware, PID from MYPIN and a SESTOS digital timer.

My newest RIMS system featuring a Chugger Pump, a RIMS tube from Brewer's Hardware and a PID from MYPIN

I like your setup. I also purchased a RIMS tube from Brewer's Hardware. When I got it I wanted to mount it on the wall on a plaque because it truly is a work of art, but I put it to use anyway. I used a heater rated at 240v, 4500 watts. At 120 volts, is reduces the wattage by a factor of 4, so...

If anybody needs a stir plate, I make them out of attractive cigar boxes, not cheap project boxes. I have some for 2 liter Erlenmeyer flasks that will make starter for a 10 gal batch using a 1 inch stir bar. I can also make a MONSTER stir plate using a 2 inch bar for a 5 liter flask. These stir...

Try an RTD (resistive thermal device) probe instead of the thermocouple. I had serious problems using a thermocouple. Ruined 3 mashes. They are not linear throughout the brewing range. RTD's are more accurate. Also, if you are measuring multiple pots (mash, sparge, biol) use a PID for EACH. That...