Search results

I suggest you use quick disconnects, like CAM & GROOVE fittings. About the capacity of the pump to handle small debris, yes! This is not a problem at all to the pump, but remember to use a good false bottom or you will get a low flow.

It happens that my system is not regulated. It was designed for higher power burners, i.e. it is connected directly to the gas cylinder as the picture below: In this way, I was thinking on using this valve, what do you think...

JonW, thanks again for answering me! I found out a way to change my stove, so it's gonna be possible to add a solenoid gas valve. Can you suggest me a solenoid gas valve, remembering that my system is high pressure, i.e. it is directly connected to the LPG cylinder. Thanks in advance. Really...

The problem is that I made my brew stand using an industrial stove, as you can see on the picture. So, I can't modify it, like adding or replacing the valve. In this way, my only solution is to attach a servo on the existing valve, or install an element and stop using the burner to control the...

Thanks for the attention, bro! I need regulate it to control the intensity of the flame, as the burner is high pressure and it's too powerful.

Hello Guys, I've built a HERMS system as shown on the picture below. The system consists of: - 3 kettles (Hot Liquor Tank, Mash Tun, Boil Kettle) - High pressure burners - BCS-460 controller To control the burner I will attach a servo-motor on the gas valve. An exemple of the valve...

Hello guys, Thank you very much for those advices. I'll add a ball valve on the outlet of the pump and make another test. Additionally, I'll improve the inlet making changes to attend these suggestions. Once again, I really appreciate your help. It's time to start brewing again. Ein prosit!!!

Hello guys, I bought those pumps and all connections on Brewers Hardware. By the way, this is the best website to buy homebrewing equipments. I asked for help for the guys of the website and they promptly told me that it may be a problem on the head and they are sending a new one. I really...

Thanks for your attention. The ball valves you see on the manifolds are not to control the flow, but only to change the direction of the flow. Like, I can recirculate the wort with the Pump A and after I can do lautering with the Pump B. I don't think the length of the manifolds is the problem...

Thanks @jafo28 for the quick answer. The pump is not moving the liquid. If I turn on the pump without the stailess steel part I can see the motor runing ok. Before you tight the screws you ckecked if the motor was running? I'm gonna try what you suggested and see if this solve the problem.

Hello Guys, I finally finished to build my HERMS system. I bought 2 Chugger Pumps and Cam Lock fittings on brewers hardware. Also, I bought a BCS-460 controller. My system is presented on the pictures attached, as well as the project I built. The system is: * 3 kettles (Hot Liquor Tank...

Guenther, muito obrigado pela resposta. :)

Estou montando uma receita de uma Weizen no Beersmith e percebi algo que me intrigou. Adicionei todos os ingredientes e ao editar o perfil da brassagem (Mash Profile) experimentei fazer 2 rampas de temperatura (sacarificação beta + sacarificação alfa) mais o mash out, como se segue...