Recent content by Scottsj

I’m interested!

This is the setup I use. It works great other than not being able to use hop socks. It’s my favorite fermenting vessel so far and really inexpensive. As for the comment elsewhere about the float fitting; mine did but just barely. If there are different sizes available you could get one that...

I’ve had pretty good luck when using the floating dip tube as it does a good job of drawing clear beer. It’s definitely slower than a pressurized transfer but not terrible. I used to run into problems with trub when I used my brew bucket. Not sure if this has helped or not but I do blow some...

This is what I do as well but I swapped out the Corny for a 7.5 gallon Sanke so I can do full batches. Works awesome. Gravity transfers work as well if you get it flowing with remaining pressure in the ferm keg and then hook the two gas posts together to keep things balanced.

Congrats! Sounds like a success to me! Wish I had the room for one. I tested mine in a SS brewbucket this weekend and could get a signal accross the room with updates every second. Not so much with the Sanke. As soon as the ball lock adaptor goes on it stops updating. I need to play with the...

I thought about that. Even looked at the glass versions to get a signal through but the extra height won’t fit in my chamber ☹️

This is what I’m using. There’s room to add an antenna but it will be tight. After my Quad is done fermenting I may take the Sanke out of the rotation so I can experiment with the antenna idea.

I have a 7.5 gallon Sanke. I usually do 5.5-6 gallons in it. Interesting comment on the height vs signal. I doubt I can put much more in as I’ve had a couple of blow-offs at this level when doing bigger Belgians w/o pressure.

Pretty sure you would be fine with pressure. I thought about this too but I don’t think two gaskets would fit under my clamp. Plus, My results with the antenna so far have been very spotty. Still trying to figure out a solution as I’d like to use the Tilt. I think Brewbuckets and the like have...

I wondered about that as well since I’ve seen others use it in similar applications. I emailed them a couple days ago but haven’t heard anything back.

I think I’m going to try the antenna trick. I’ve got the hardware to play with so it’s free to try and a chance to tinker.

Thanks guys. I’m not getting a signal even with my phone laying on the fermentor like they show with the repeater. If I take the cap off the keg it connects but not with the cap on. I’d consider the repeater if I was sure it would pick up the signal through the thicker stainless of the Sanke keg...

Has anyone done any more work on this? I ferment with a 7 gal Sanke and I’m not getting a signal from the Tilt.

Nice setup for dry hopping!

I just re-read the OP and realized the question was on larger units. Sorry to side track the conversation.