Recent content by Adrian Gresores

Thank you again.

One more piece of advice requested...Now, that I have gotten everything to work, and since I can't stop myself from tinkering, I would like to connect the controller's relay 2 to my pump. It would then turn on automatically during mash steps, as per its programming. Would the wiring for that be...

Well, it looks like it was all due to a faulty SSR. I replaced it and everything is working as it should. Thank all of you for your help.

It is a GFCI breaker and I will test it.

I appreciate all your advice. I will go through them and try them. Unfortunately, I didn't get a chance, before we left on vacation today.

Yes, the element is getting hot. I do plan to check all the wiring. I hadn't mentioned that I have been using this panel, as is, for a couple of years now. It had been working perfectly. I only made 2 changes recently. I switched a DSPR120 to a DSPR320A, and added the buzzer (for now, the...

And this is the element firing lamp.

Here is the link.

I know the voltage should be 0 or 240 across SSR 1 and 2. I don't understand the 115V and, even more, why there is any voltage when the controller isn't sending a significant voltage to 3 and 4.

I know the voltage should be 0 or 240 across SSR 1 and 2. I don't understand the 115V and, even more, why there is any voltage when the controller isn't sending a significant voltage to 3 and 4.

Thank you.

So this? Will that fix the 115V output between SSR 1 and 2?

It happens both when the element is connected and when it is not. I miswrote when I first entered this message. I corrected it to terminals 1 and 2 of the SSR.

Lately, I have been having a big problem with my controller panel. Specifically, power is being sent to the heating element even before any program is running on the DSRP320A (top line shows current water temperature and lower line shows STOP). For reference, if I only turn on the main power...

Thanks