Pivzavod
Well-Known Member
So I have a 2 tap tower for 2 years now and this is the second time I come across this problem. The first time was about a month ago on tap #2. All of a sudden it would not deliver the beer when the tap was pulled down. I thought I fixed it by untying the rubber band that was holding tap #2 tubing.
A few minutes ago I tried to pull from tap #1 that was working 30 mins ago and now all of a sudden it nothing. Just as a side note I typically sugar carb my kegs and keep them connected but only pump them up with gas as needed. Keg #1 has enough co2 and has been in use for over a week. I disconnected / reconnected gas line from keg #1.
Please offer some insights to the cause and offer some troubleshooting steps. Regulator is showing that there is plenty of gas inside and I bled some gas and added more without success. My gas supply is good, what is intermittently wrong with the lines?
Please advise!
A few minutes ago I tried to pull from tap #1 that was working 30 mins ago and now all of a sudden it nothing. Just as a side note I typically sugar carb my kegs and keep them connected but only pump them up with gas as needed. Keg #1 has enough co2 and has been in use for over a week. I disconnected / reconnected gas line from keg #1.
Please offer some insights to the cause and offer some troubleshooting steps. Regulator is showing that there is plenty of gas inside and I bled some gas and added more without success. My gas supply is good, what is intermittently wrong with the lines?
Please advise!