carnageasada
Active Member
- Joined
- Jan 11, 2017
- Messages
- 25
- Reaction score
- 1
Hi all,
Drawing on the wealth of expertise on here in brewing and all else perhaps to adapt as the title suggests, more specifically I need:
5/8" x 18 (fine) male thread going to GHT (garden hose) female to drive a plate chiller for knockout.
Definitely would consider going straight from the 5/8" to a 1/2" barb or similar and just cut some tubing, can be brass or stainless, and QD would be wicked, but not expecting miracles...
Closest I've seen so far is stuff for fuel lines in cars, but then they have flares that would make the threading not as deep and gaskets wouldn't be feasible, which really won't fly. BTW, limiting factor is my damn faucet head, no simple adapter kit has what's needed either that I have seen, thanks Kohler! I know the GHT side's easier if I cut my own tubing especially.
Well, thanks in advance, I really know something's gotta be out there!
Drawing on the wealth of expertise on here in brewing and all else perhaps to adapt as the title suggests, more specifically I need:
5/8" x 18 (fine) male thread going to GHT (garden hose) female to drive a plate chiller for knockout.
Definitely would consider going straight from the 5/8" to a 1/2" barb or similar and just cut some tubing, can be brass or stainless, and QD would be wicked, but not expecting miracles...
Closest I've seen so far is stuff for fuel lines in cars, but then they have flares that would make the threading not as deep and gaskets wouldn't be feasible, which really won't fly. BTW, limiting factor is my damn faucet head, no simple adapter kit has what's needed either that I have seen, thanks Kohler! I know the GHT side's easier if I cut my own tubing especially.
Well, thanks in advance, I really know something's gotta be out there!