Yea complete overkill with the mega lag bolts but I like the aggressive look! And if I need to build a house I will have some bolts for it
Nice keezer! Love the neon. Did you have that made? If so, where?
Finally got this put together. It is hinged on the collar. Used liquid nails to secure the top. I still need to chalkboard the lid, but functionally it's done.
Almost finished rebuilding .I went from 3 taps in front on the collar to building a box for the tower. Everything is stainless. Taps. Tailpiece, shanks, faucets. Waiting for a fan to circulate air through the tower. And some new handles.
Looks good but I'm curious, did you chew those holes into the box? Just kidding. I've certainly had to make due when I didn't have the right tool for the job.
Most full size refrigerators have the condenser coils either in the back, or the bottom of the unit, not in the sides. Look first, but I bet you would be OK.
I left my hamster in there. He made a few more holes.
Almost finished rebuilding .I went from 3 taps in front on the collar to building a box for the tower. Everything is stainless. Taps. Tailpiece, shanks, faucets. Waiting for a fan to circulate air through the tower. And some new handles.
Whats that on tap? Rhubarb beer?
Whats that on tap? Rhubarb beer?
Very nice. Is that bottle opener from Green Man?
It is a green man but no affiliation with the brewery. Really affordable from amazon. http://www.amazon.com/Bronze-Finish-Celtic-Greenman-Mounted/dp/B005WXZRIU?ie=UTF8&keywords=Green%20man%20bottle%20opener&qid=1462221162&ref_=sr_1_7&sr=8-7
Way bigger than I thought it was going to be, but I actually like the size.
Still a work in progress but I got my first 2 taps installed this weekend. Drilled the pilot holes for two more taps and coverd them w/ caulk until I get my secondary regulator. Need to drill a hole for my gas-line so I can move my CO2 out of there and to build my magnetic drip tray but it works like charm. Planning on doing the whole fridge in chalk board paint eventually.
Put that CO2 bottle on the outside, and you got room for two more. Then convert the freezer side and now you can hold eight.
Yeah, I'm heading down that road slowly. I only started kegging this spring and have only the two kegs right now so its not an issue yet. The plan is definitely to move the CO2 outside and add 2 more kegs but I'm waiting until I get my 4-way secondary regulator and a 3rd keg. I'm actually I bit worried about getting the 4th keg in there, side by side they're going to be a real tight squeeze, tried it quick when I put it it all back together and they acted like they weren't going to fit. I think they will with a bit more force applied but since I don't need them to fit that way yet I held off.
As for the freezer, that holds all the Costco stuff and there's no way SHMBO is letting me take that. Plus its much smaller, probably only room for 2 unless I stacked vertically.
Uhm...yeaahhh, I think you should be posting a link to your build. Very nice Keezer!
Link was above the photo......
Enter your email address to join: