Here is my set up. It's in the laundry room so it's hard to get the whole thing in a picture. My wife gets the freezer so she's happy.
$109 igloo fridge at Walmart, homemade temp controller, small low rpm blower with hose, PVC, homemade Insulated wooden box, silicone
Blower hose goes all the way to the box through PVC, air returns in PVC next to beer lines. Works well I usually don't even plug in the blower I don't really get any first pour foam.
$109 igloo fridge at Walmart, homemade temp controller, small low rpm blower with hose, PVC, homemade Insulated wooden box, silicone
Blower hose goes all the way to the box through PVC, air returns in PVC next to beer lines. Works well I usually don't even plug in the blower I don't really get any first pour foam.
Pics of a bar/kegerator I just built. It's a Perlick 3 keg beer dispenser that was tucked in behind the bar at some little tavern in western Wisconsin. Bought it for $150 on Craigslist. Put it up on casters, added all the wood etc... put a paint job on it and plumbed it for ball locks. The chairs were out of the Walleye Lodge bar in Osakis, MN. Waiting for two more kegs to fill to break her in proper.
Here is mine, open. 19cf, 8 taps of goodness, enough room to store my yearly hop supply. Love it !
So is the spaghetti monster to help prevent foamage? I will add that's the neatest spaghetti monster I've seen yet
Looks like the Eva Drys are breeding...
Cheers!
Here is mine, open. 19cf, 8 taps of goodness, enough room to store my yearly hop supply. Love it !
The lid sits on a 2x4 collar and there is a 2x8 veneer that extends above and below the 2x4.
<snip>
The lid is hinged to the collar, and the collar is just setting on the freezer with some weather stripping. The collar isn't attached to the freezer at all, and so far that hasn't been an issue.
Just up graded from a two tap 5.0 cu ft Haier, to a four tap 7.3 cu ft Frigidaire system! Make my kitchen more bar like! My neighbors think I'm crazy!
I finally get to join the fun. Mostly done. Have a little work still, but it's now usable!
Very "brave" going in through the side like that.
Enter your email address to join: