So I got a Cornelius 4 body secondary regulator set that I had to rebuild. When I put it all back together there were a couple of small leaks. My question is can I use this with or with Teflon tape?
http://www.amazon.com/dp/B001AMMXZW/?tag=skimlinks_replacement-20
I know kegconnection uses this when they assemble there regs.
http://www.amazon.com/gp/product/B001P5F9X2/?tag=skimlinks_replacement-20
Are these two products comparable or am I way off base. I picked up a tube of the first link at my local homedepot. But I'm wondering if I should use it or just order the other stuff from Amazon.
Thanks all
http://www.amazon.com/dp/B001AMMXZW/?tag=skimlinks_replacement-20
I know kegconnection uses this when they assemble there regs.
http://www.amazon.com/gp/product/B001P5F9X2/?tag=skimlinks_replacement-20
Are these two products comparable or am I way off base. I picked up a tube of the first link at my local homedepot. But I'm wondering if I should use it or just order the other stuff from Amazon.
Thanks all
Last edited by a moderator: