I'm 99% sure this will work, but I want to double check. Most people seem to be using JB Weld to seal the power connections to their heating element. I was planning on fitting PVC right around the connections and then filling it will the silicone.
Would it be easier/just as effective to use a high temp RTV silicone to seal the electrical connection?
I was thinking the benefit of this would be that if there was ever a leak I could cut away the silicone and reseal it. I could also use the silicone for a wider variety of jobs.
This is the silicone I am considering:
http://www.amazon.com/dp/B004V40DJ4/?tag=skimlinks_replacement-20
Thanks!
Would it be easier/just as effective to use a high temp RTV silicone to seal the electrical connection?
I was thinking the benefit of this would be that if there was ever a leak I could cut away the silicone and reseal it. I could also use the silicone for a wider variety of jobs.
This is the silicone I am considering:
http://www.amazon.com/dp/B004V40DJ4/?tag=skimlinks_replacement-20
Thanks!
Last edited by a moderator: