Since the list on the first post was last updated in 2009, I just want to check something. Is the generally accepted "best parts" list is still the same?
I'm basically looking at
- http://www.brewhardware.com/rimsherms-parts/122-rims for the body
- Adding a 1 1/2" SS Camlock pairing to make the element easily removed
- The 1500W 120-1500-ELD element from plumbingsupply.com
- Auber 2352 PID
- Auber TC-K100M1/2NPT K-type thermocouple
- A 25A SSR with heat sink
- 20A GFCI extension cord
- Couple of appropriately rated switches, a project box, and perhaps a cooling fan
Bueno? Suggestions?
That's a good start, but why not spend $17 extra and make it with triclamp fittings. I found this RIMS Tube at glaciertanks in the not easily seen "More" tab of the "Triclamp Product 304/316" tab. It comes with everything you need; 2 x 1.5" triclamp T's and 5 x 1.5" Triclamps with seals for an amazing $89. Check out JoeyChopps parts list for the 1.5" Triclamp to 1" NPT fitting you'll need for your element and my post on the 1.5" Triclamp RTD. Then all you need is a pump, heater element, PID circuit, and your wort in/out connections.