Thanks, the problem I have with most of the clips you have shown is not being able to fit a 3/4" OD hose.If you mean those hard the describe to a search-engine clips that hold your siphon hose to your bottling-bucket, save yourself the aggrivation... I bought one online and another from my LHBS and while they can be a little useful under rigid conditions, what worked best was a binder-clip with a tin-tie (salvaged from a bag of coffee beans):
View attachment 844411
The purpose made clips will hold a hose in place but not against a lines tendency to resist and bend where it wants to and if you move anything at all, the whole clip justs pops off. The binder-clip and tin-tie is much more reliable and if you're worried about scratching and sanitation, just put a piece of star san soaked cloth under the clip.
Oh, I see, the binder clip gives you flexibility, I looked at that wrong. I can basically use anything tin-tie to hold the hose! Thanks that will work!That black one in the pic will spread some to fit, but it tends to pop out. When I need a holder now, I just use the big binder clip...so much easier to just twist a tin-tie around.
Here's something that may work I just ran across:Oh, I see, the binder clip gives you flexibility, I looked at that wrong. I can basically use anything tin-tie to hold the hose! Thanks that will work!
I actually have the other two clips and they only work for smaller hoses!
Thanks I actually just ordered a set of these.I tend to keep these around on a brew day..
https://www.homedepot.com/p/Anvil-Spring-Clamp-Set-22-Piece-TGS0199A/302755768
Enter your email address to join: