Pump Switch Box Help.

[jweidman]

hey guys so im getting back in to homebrewing finally got a steady schedule and now im the process of making things easier for me, so with that being said i have 2 chugger pumps that i wanna build a switch box for with the intent of adding it to a bigger fully automated box in the future.

here is a image of the wiring im thinking of doing let me know if i have it right and any corrections i can do.

here is a key also so you know what is what.

1 and 2 are the pumps
3 is the power to the wall
4 is the main selector power switch
5 and 6 are the selector switches for the pumps
7,8 and 9 are LED indicator lights to know the power is on.
10 is Hot Terminal bridge
11 is ground Terminal Bridge.

thanks again guys to the help and as always CHEERS!!!!!

 

[ChocolateMaltyBalls]

It looks good, as best as I can follow it. Are you using push button LEDs?

 

[jweidman]

So I actually pulled out all my LEDs and switches and boy was I wrong. The LEDs have no negatives they are just straight positive through, (should have known) the switches have no negatives they are just that a switch(another should have known) but hey I learned a lot and I am gonna have a pro. Look over it before I connect it to my apts electric