aeviaanah
Well-Known Member
- Joined
- Jul 1, 2012
- Messages
- 1,686
- Reaction score
- 217
I have a PID controlling cleaner temp in keg washer. SSR is showing off but is stuck open causing overheat issues. Even with the installed heat sink, my issue may be caused by excessive heat or poor SSR. I bought a 5 pack on Amazon and most of them show the same symptoms. Heatsink and SSR are both internal to the panel but I'm seeing the issue even with the panel door left open.
I either need to swap out for a PID with contactor/relay output or find a better SSR. Thoughts? Perhaps oversizing the SSR would help?
I either need to swap out for a PID with contactor/relay output or find a better SSR. Thoughts? Perhaps oversizing the SSR would help?