But did you offer her a homebrew?yes, the "Taylor Swift" game, and yes, we saw her/took a photo
But did you offer her a homebrew?yes, the "Taylor Swift" game, and yes, we saw her/took a photo
I see similar. The post itself contains links to Google Drive, rather than embedding the actual images or videos in the post. If poster hasn't made their Google Drive publicly accessible, folks can't see the pictures.As @doug293cz didn't mention anything it might just be me, but instead of images I'm seeing this...
View attachment 830585
Cheers!
I don't think they are available in the US yet. There is usually a 6 to 9 month delay between Kegland releasing new items in Australia and when they become available in the US. So I am guessing they will be available in the next 2 to 3 months in the US (just a guess). Morebeer and Williams Brewing are usually the first websites to sell new KegLand items in the US.BTW, is the mini actually available in the US yet? Unless I missed something, I think everyone who's shared experiences got it direct from Kegland to review.
Thanks for catching that, I forgot to set permissions. Should be fixed now.As @doug293cz didn't mention anything it might just be me, but instead of images I'm seeing this...
View attachment 830585
Cheers!
That flexing of the tap when connected to the flow control disconnect worries me a bit. Is this thing going to survive at a party?If I had to keep only one, I'd keep the Nuka mini because of its versatility. If it was just a bit sturdier I think it'd be the best possible option for this kind of tap.
Are you saying that by varying the trigger pull, you can control the flow? I just tried it with mine to double check, and unless I have the trigger fully pulled it works like a picnic tap and sprays foam. I have the $15 ABS version.Sorry incorrect with the Pluto Gun - it can work the same if connected to an ordinary disconnect as it has It's own flow control on the 'trigger'
I find with my 'trigger' I can vary the rate of flow - and so the foam buildup - depending on how hard it's pulledAre you saying that by varying the trigger pull, you can control the flow? I just tried it with mine to double check, and unless I have the trigger fully pulled it works like a picnic tap and sprays foam. I have the $15 ABS version.
Mine has survived at least 2 parties without any sign of failure, so at least one data point says yes.That flexing of the tap when connected to the flow control disconnect worries me a bit. Is this thing going to survive at a party?
So the flow control insert gets gunked up with trub? In that case it does sound like the mini might be better suited to your specific use. My guess is that the faucet itself should be as easy to clean as any other, but I'm not sure about the flow control QDs.I use a PT 2 (.1?) for pulling samples off my fermentation kegs (that have his floating filtered dip tubes in them). Unfortunately, there's still a little trub that gets pulled through them, and unless I immediately flush them they get clogged and are unusable. Does it look like the Nukatap Mini would do a better job of staying clear (or at least be easier to clean out)?
I'm guessing that's what gets clogged up? Either that or in the twist spigot. I'm not worried about the flow-control portion of it for this application.So the flow control insert gets gunked up with trub? In that case it does sound like the mini might be better suited to your specific use. My guess is that the faucet itself should be as easy to clean as any other, but I'm not sure about the flow control QDs.
I use the PT as well. If yours is getting clogged, and flow control is not an issue, can’t you just remove the the spiral and use the tap without it? IF that is what is getting clogged, it can’t clog if it ain’t there!I'm guessing that's what gets clogged up? Either that or in the twist spigot. I'm not worried about the flow-control portion of it for this application.
I want to say I've taken the spiral out and it was still clogged but I would have to verify.I use the PT as well. If yours is getting clogged, and flow control is not an issue, can’t you just remove the the spiral and use the tap without it? IF that is what is getting clogged, it can’t clog if it ain’t there!
Enter your email address to join: