McMaster epoxy nozzle / dip tube insert

[malkore]

Greetings,
haven't brewed in years and needed to find the link to the epoxy nozzle that you could pull apart and the insert could fit down your dip tube, adding resistance to the line...thus you didn't need long tap lines.

I can't find that old thread with the link to the exact part number for those nozzles.

ANyone have that link?

thanks!

 

[day_trippr]

The ones I used to use were McMaster 74695A59 - the 74695A58 is a bit shorter.
Also Grainger https://www.grainger.com/product/LOCTITE-Mixing-Nozzle-3NVL6

Here's the thread https://www.homebrewtalk.com/showthread.php?t=100151

Cheers!

 

[kh54s10]

Looked at this a couple of years ago. Haven't seen it in a long while. It seems the right length of lines would be better.

 

[day_trippr]

That's what I concluded as well.
They're useful if putting an unusually effervescent brew on a line that's tuned for lower carbed beers...

Cheers!

 

[jmark]

I tried those with a highly carbed tripel but had no luck. Ended up using a flow control faucet to fix the issue (longer lines weren't really what I wanted to do since I change out beers quite often).

 

[malkore]

I have a friend kegging kombucha, which does need higher carbonation. Thanks all!